Important Notice:Update to our Terms and ConditionsLearn More

System connectors and interfaces

Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports

67 Products

Filter

New

MT-TFB OC Thread forming bolt
Description
Thread-forming bolt for use when assembling MT girder structures, for outdoor use with low pollution
Material composition
High Strength Steel
Surface finish
Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New



Material composition
Nut: C4C - EN 10263-2, DD11 MOD - HN 547, Plastic: PBT
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New



Material composition
Nut: C4C - EN 10263-2, PA66
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New



Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New



Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New



Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
3 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-L1 Corner angle
Description
Angle bracket for assembling light-duty strut channel structures
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Material thickness
6 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-L1 OC Corner angle
Description
Angle bracket for assembling light-duty strut channel structures, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-L2 OC Corner angle
Description
Elongated angle bracket for assembling strut channel structures, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-T/1 Transverse connector
Description
Wing fitting for assembling strut channel structures
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-T/1 OC Transverse connector
Description
Wing fitting for assembling strut channel structures, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-LL1 Angle connector
Description
Right-angle connector for assembling strut channel structures
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-LL1 OC Angle connector
Description
Right-angle connector for assembling strut channel structures, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-T 3D/2 Wing fitting
Description
Double wing fitting for connecting three strut channels in a 3D structure
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-L2 Corner angle
Description
Elongated angle bracket for assembling strut channel structures
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-LL2 Angle connector
Description
Right-angle, elongated connector for assembling strut channel structures
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-T A Corner bracket
Description
Adjustable angle bracket for assembling strut channels in a T shape
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-T A OC Corner bracket
Description
Adjustable angle bracket for assembling strut channels in a T shape, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-ES-40 Splice clevis
Description
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-GL A OC Angle bracket
Description
Adjustable, braced angle bracket for heavy-duty MT girder structures subject to 3D loading, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-ES-40 OC Splice clevis
Description
Splice connector for coupling MT strut channels end-to-end (MT-40, 50, 60, 40D)
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-GS OC Angle bracket
Description
Braced angle bracket for heavy-duty strut channel structures subject to 3D loads, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-GSP T OC Gusset plate
Description
Gusset plate for T-shaped connections with MT-70 and MT-80 girders, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-GLP T OC Gusset plate
Description
Gusset plate for T-shaped connections with MT-80, MT-90 or MT-100 girders, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-L Light-duty baseplate for strut channels
Description
Base connector for anchoring light-duty strut channel structures to concrete or steel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-T Light-duty baseplate
Description
Base connector for anchoring light-duty strut channel structures to concrete or steel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-O2 Baseplate for strut channels
Description
Base connector for anchoring strut channel structures to concrete or steel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-O2 OC Baseplate
Description
Base connector for anchoring strut channel structures to concrete and steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-GS O4U OC Medium-duty baseplate
Description
Base connector for anchoring MT-70 and MT-80 girder structures to concrete, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-AB A OC Adjustable brace fitting
Description
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-AB-L 45 Angle brace
Description
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-TLB Twist-Lock bolt
Description
Hexagon bolt for use with Twist-Locks when assembling strut channel structures
Material composition
ISO 898-1 8.8
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-TLB OC Twist-Lock bolt
Description
Hexagon bolt for use with Twist-Locks when assembling strut channel structures, for outdoor use with low pollution
Material composition
ISO 898-1 8.8
Surface finish
Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps
MT-TL Twist-Lock channel nut
Description
Nut for attaching media to MT strut channels
Material composition
High Strength Steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps
MT-TL OC Twist-Lock channel nut
Description
Nut for attaching media to MT strut channels, for outdoor use with low pollution
Material composition
High Strength Steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps
MT-FP Threaded strut plate
Description
Fixation plate with threaded hole for attaching media to strut channels, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-AB A Adjustable brace fitting
Description
Adjustable brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-AB-L 45 OC Angle brace
Description
45-degree angle brace for anchoring bracing of MT-40 and MT-50 strut channel structures to concrete, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-AB-LL2 45 45-degree angle bracket
Description
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-AB-LL2 45 OC 45-degree angle bracket
Description
45-degree angle bracket for bracing MT-40 and MT-50 strut channel structures, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-GL OC Angle bracket
Description
Braced angle bracket for heavy-duty MT girder structures subject to 3D loads, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-GS A OC Angle bracket
Description
Adjustable, braced angle bracket for girder and strut channel structures subject to 3D loading, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-T OC Light-duty baseplate
Description
Base connector for anchoring light-duty strut channel structures to concrete or steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps


Material composition
Aluminium, EPDM rubber
Surface finish
n/a
Material thickness
2.75 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps


Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps
MT-C-T 3D/2/HL OC transversal connector
Description
3D connector for assembling rigid strut channel structures for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-O2B 3D-load baseplate
Description
Base connector for anchoring strut channel structures under 3D loading to concrete or steel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-CTAB Screw


Description
Grade 8.8 bolt with square washer used for assembling raised floor systems in dry, indoor environments
Material composition
Q355 or better steel
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-C-GSP L A OC Connector plate
Description
Hot-dip galvanised girder connector for assembling and bracing modular support structures in moderately corrosive environments
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
4 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-O2B OC 3D-load baseplate
Description
Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-O4 3D-load baseplate
Description
Base connector for anchoring strut channel structures under 3D loading to concrete and steel or steel
Material composition
Q235 or better steel
Surface finish
Indoor Coated - Pre-galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-O4 OC 3D-load baseplate
Description
Base connector for anchoring strut channel structures under 3D loading to concrete and steel, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-GS T OC Girder baseplate
Description
Base connector for anchoring MT-70 and MT-80 girder structures to concrete and steel, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps

New

MT-B-GXL O4 OC Heavy-duty baseplate
Description
Base connector for anchoring 3D, heavy-duty MT-100 girder structures to concrete, for outdoor use with low pollution
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps
MT-FPS-S Pipe shoe guide
Description
Adjustable sliding bracket for fastening MP-PS pipe shoes to Hilti MT modular girders
Material composition
S280GD+ZM300
Surface finish
Outdoor Coated - ZM
Material thickness
5 mm


Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
12 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps


Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3)
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps


Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
3 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps
MT-EDB Wall-to-wall connector (hot-dip galvanized)
Description
Heavy-duty adjustable baseplate for connecting an MT girder horizontally between two parallel walls
Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
Baseplate 8 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps


Material composition
Q355 or better steel
Surface finish
Outdoor Coated - HDG
Material thickness
10 mm
Products in this group meet the requirements of EN 1090-1
CSA_C_PDP.eps
ICC-ES_Mark.eps
Showing 1 - 60 of 67 Products