Galvanized

MM-C-16

Galvanized 16 mm high MM strut channel for light-duty applications

• Height: 16 mm
• Material thickness: 1 mm
• Material composition: S250GD - DIN EN 10346

SR 55.20

Compare (1)

MM-C-30

Galvanized 30 mm high MM strut channel for light-duty applications

• Height: 30 mm
• Material thickness: 1 mm
• Material composition: S250GD - DIN EN 10346

SR 66.00

Compare (1)

MM-C-36

Galvanized 36 mm high MM strut channel for light- to medium-duty applications

• Height: 36 mm
• Material thickness: 1.75 mm
• Material composition: S250GD - DIN EN 10346

SR 90.48

Compare (1)

MM-C-45 New

Galvanized 45 mm high MM strut channel for light- to medium-duty applications

• Height: 45 mm
• Material thickness: 1.75 mm
• Material composition: S250GD - DIN EN 10346

SR 7,488.00

Compare (1)

MM-B-30

Bracket

• Material thickness: Channel: 1 mm, Baseplate: 4 mm
• Material composition: Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2
• Surface finish: Galvanized

SR 448.00

Compare (1)

MM-B-36 New

Bracket

• Material thickness: Channel: 1.75 mm, Baseplate: 6 mm
• Material composition: Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2
• Surface finish: Galvanized

From SR 416.00

Compare (1)

MM-S New

Galvanized pipe clamp saddle for connecting threaded components to MM strut channels

• Material composition: S355 MC - DIN EN 10149-2
• Surface finish: Galvanized

From SR 52.00

Compare (1)

MM-WN

Galvanized wing nut for connecting modular support system components to MM strut channels

• Tightening torque: 5 Nm
• Material composition: Nut: DC04 - DIN EN 10130, Wing: PA
• Surface finish: Galvanized

From SR 97.60

Compare (1)

MM-A-90

Angle

• Tightening torque: 12 Nm
• Thread - M: M8
• Material composition: DC04 - DIN EN 10130

SR 192.00

Compare (1)

MM-AH-90 New

Galvanized 90-degree angle for connecting multiple MM strut channels

• Tightening torque: 12 Nm
• Thread - M: M8
• Material composition: DC04 - DIN EN 10130

SR 203.20

Compare (1)

MM-R-16-36

Galvanized channel foot for fastening MM channels to various base materials

• Tightening torque: 12 Nm
• Thread - M: M8
• Material composition: Material: DC04 - DIN EN 10130, Plate: DD11 - DIN EN 10111

SR 552.00

Compare (1)

MM-T-16-36

Galvanized beam clamp for connecting MM strut channels directly to steel beams

• Wrench size: 13 mm
• Material composition: EN-GJMB-550-4 - DIN EN 1562
• Surface finish: Galvanized

SR 315.20

Compare (1)

MM-CW

Channel washer

• Material composition: DD11 - DIN EN 10111
• Surface finish: Galvanized
• Weight: 16 g

From SR 28.96

Compare (1)

MM-E

Channel end cap

• Material composition: Polypropylene (PP)

From SR 44.80

Compare (1)

MM-RI New

Rubber inlay

• Material composition: EPDM
• Temperature resistance: -40 - 110 °C
• Noise reduction: 13 dB (A)

SR 648.00

Compare (1)

MM-AB

Angle brace

• Material thickness: 2.5 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Galvanized

SR 147.20

Compare (1)

MQ-21

Galvanized 21 mm high MQ strut channel for light-duty applications

• Approvals: GL approved (19375-11HH)
• Height: 21 mm
• Material thickness: 2 mm

SR 177.12

Compare (1)

MQ-41 New

Galvanized 41 mm high MQ strut channel for medium-duty applications

• Approvals: GL approved (19375-11HH)
• Height: 41 mm
• Material thickness: 2.0 mm

SR 213.60

Compare (1)

MQ-41 D New

Double installation channel

• Height: 83 mm
• Material thickness: 2 mm
• Material composition: S250GD - DIN EN 10346

SR 820.80

Compare (1)

MQ-21 D New

Galvanized MQ installation double channel for medium-duty applications

• Approvals: Shock approved (LS-S-06-904), GL approved (19375-11HH)
• Height: 41 mm
• Material thickness: 2 mm

SR 835.20

Compare (1)

MQ-52 New

Galvanized 52 mm high MQ strut channel for medium-duty applications

• Height: 52 mm
• Material thickness: 2.5 mm
• Material composition: S250GD - DIN EN 10346

SR 427.20

Compare (1)

MQ-52-72 D New

Galvanized MQ installation double channel for medium/heavy-duty applications

• Height: 124 mm
• Material thickness: 2.5 mm, 2.75 mm
• Material composition: S250GD - DIN EN 10346

SR 1,147.20

Compare (1)

MQ-72

Galvanized 72 mm high MQ strut channel for medium/heavy-duty applications

• Height: 72 mm
• Material thickness: 2.75 mm
• Material composition: S250GD - DIN EN 10346

SR 864.00

Compare (1)

MQZ-E New

Channel end cap for covering the ends of Hilti MQ strut channels

• Approvals: GL approved (19375-11HH), Shock approved (LS-S-06-904)
• Material composition: Polypropylene (PP)
• Surface finish: Not galvanized

From SR 107.20

Compare (1)

MQK-41 New

Galvanized bracket with a 41 mm high, single MQ strut channel for medium-duty applications

• Material thickness: Channel: 2 mm, Baseplate: 8 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only

From SR 1,192.00

Compare (1)

MQK-41/4

Bracket (4-hole)

• Material thickness: Channel: 2 mm, Baseplate: 8 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized

SR 1,322.40

Compare (1)

MQK-72

Galvanized bracket with a 72 mm high, single MQ strut channel for medium-duty applications

• Material thickness: Channel: 2.75 mm, Baseplate: 10 mm
• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only

From SR 998.40

Compare (1)

MQN New

Galvanized channel connector for joining any elements with a butterfly opening

• Approvals: Shock approved (LS-S-06-904), GL approved (19375-11HH)
• Tightening torque: 40 Nm
• Thread - M: M10

SR 480.00

Compare (1)

MQA

Galvanized pipe clamp saddle for connecting threaded components to MQ strut channels

• Tightening torque: 18 Nm
• Thread - M: M10
• Material composition: Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111, Plastic: PA 6.6

SR 764.00

Compare (1)

MQM New

Galvanized wing nut for connecting modular support system components

• Material composition: Wings: plastic PA, Nut: S355MC - DIN EN 10149-2
• Surface finish: Electrogalvanized - for dry indoor use only

From SR 380.00

Compare (1)

MQM New

Galvanized wing nut for connecting modular support system components

• Approvals: Shock approved (LS-S-06-904)
• Tightening torque: 40 Nm
• Thread - M: M12

SR 560.00

Compare (1)

MQZ-L

Drilled plate

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only

From SR 114.40

Compare (1)

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Maximum load - F: 3.5 kN

SR 260.00

Compare (1)

MQA-B New

Ultimate galvanized pipe clamp saddle – fire-tested according to ETA

• Approvals: GL approved (19375-11HH)
• Material composition: Nut: GTW45, DIN 1692, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT
• Surface finish: Electrogalvanized - for dry indoor use only

From SR 752.00

Compare (1)

MQW-Q2 New

Galvanized 90-degree pre-assembled angle for connecting multiple MQ strut channels

• Approvals: GL approved (19375-11HH)
• Wrench size: 17 mm
• Tightening torque: 40 Nm

SR 720.00

Compare (1)

MQW 90° New

Angle

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

From SR 249.60

Compare (1)

MQW 45°/135° New

Galvanized 45- or 135-degree angle for connecting multiple MQ strut channels

• Approvals: Shock approved (LS-S-06-904), GL approved (19375-11HH)
• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only

SR 256.00

Compare (1)

MQV New

Channel tie - flat

• Approvals: GL approved (19375-11HH)
• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only

SR 248.00

Compare (1)

MQV-2/2 D New

Galvanized channel foot for fastening channels to concrete

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

SR 375.20

Compare (1)

MQV-2D New

Galvanized channel connector for two-dimensional structures

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

From SR 396.80

Compare (1)

MQP New

Galvanized channel foot for fastening channels to concrete

• Surface finish: Electrogalvanized - for dry indoor use only

From SR 1,176.00

Compare (1)

MQP-1

Rail support

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

SR 246.40

Compare (1)

MQP-45

Rail support

• Material composition: DD11 MOD - HN 547, S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

Error occurred

Please contact us.

Compare (1)

MQP-E

Wall mount

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

SR 300.80

Compare (1)

MQP-U

Universal joint

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 5 mm

SR 296.00

Compare (1)

MQB New

Clamp (channel to channel)

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

From SR 229.60

Compare (1)

MQB

Clamp (channel to concrete)

• Material composition: S235JR - DIN EN 10025
• Surface finish: Electrogalvanized - for dry indoor use only
• Material thickness: 4 mm

SR 320.00

Compare (1)

MQT

Clamping claw

• Tightening torque: 40 Nm
• Material composition: GJMW400-5 - EN 1562
• Surface finish: Electrogalvanized - for dry indoor use only

SR 688.00

Compare (1)

MC-PU

Galvanized load distribution plate for use where threaded components/bolts are fitted through the open face of MC-3D installation channel indoors

• Material composition: Structural steel with minimum yield strength of 235 N/mm2
• Surface finish: Electrogalvanized
• Material thickness: 4 mm

SR 322.40

Compare (1)

MC-PU OC-A

Hot-dip galvanized (HDG) load distribution plate for use where threaded components/bolts are fitted through the open face of MC-3D installation channel outdoors

• Material composition: Structural steel with minimum yield strength of 235 N/mm2
• Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
• Material thickness: 4 mm

SR 448.00

Compare (1)

MC-A-90

Galvanized angle connector for 90-degree attachment of MC-3D channels to one another with higher load requirements indoors

• Material composition: Structural steel with minimum yield strength of 235 N/mm2
• Surface finish: Electrogalvanized
• Material thickness: 4 mm

SR 172.80

Compare (1)

MC-AH-90

Galvanized, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another indoors

• Material composition: Structural steel with minimum yield strength of 235 N/mm2
• Surface finish: Electrogalvanized
• Material thickness: 4 mm

SR 212.80

Compare (1)

MC-CU

Galvanized connector for fastening MC-3D installation channels to a concrete substructure or another channel indoors – either perpendicularly or at an angle

• Material composition: Structural steel with minimum yield strength of 235 N/mm2
• Surface finish: Electrogalvanized
• Material thickness: 4 mm

SR 338.88

Compare (1)

MC-3D-41 New

Galvanized installation channel for 2D and 3D indoor applications

• Height: 41 mm
• Material thickness: 1.6 mm
• Material composition: Structural steel with minimum yield strength of 280 N/mm2

SR 206.88

Compare (1)

MC-72 New

Galvanized installation channel for higher load requirements and indoor use

• Height: 72 mm
• Material thickness: 2.75 mm
• Material composition: Structural steel with a minimum yield strength of 250 N/mm2

SR 619.20

Compare (1)

MC-WN-M10

Wing nut

• Tightening torque: 40 Nm
• Thread - M: M10
• Material composition: QStE 380 TM - SEW 092

SR 148.00

Compare (1)