Hilti Website 
Update of quantity
Please note, the order volume has been updated. This is due to package and minimum order quantities.
Please note, the order volume has been updated to . This is due to package and minimum order quantities.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
Move cursor over image to zoom.
Click on image to zoom.
PROFIS Engineering Suite structural design software
New productItem #r6502279
Cloud-based PROFIS engineering software for designing concrete-to-steel and concrete-to-concrete connections according to a wide range of codes and approvals
- Capabilities: Anchoring steel to concrete, Anchoring steel to masonry, Concrete overlay, Concrete over metal deck, Handrail fastening, Post-installed rebar
- Codes and approvals: Supports many country-specific design methods, and can generate detailed design reports to easily verify compliance.
- Training and support: No matter if you are a newcomer or an expert, we offer technical training and demonstrations (face-to-face and online) to guarantee you can exploit the full potential of the software.
Share
Highlights
Highlights
The fastest way to design baseplates with post-installed and cast-in anchors; post-installed rebar; concrete overlay, handrails and other fixtures with Hilti
PROFIS Engineering Suite is cloud-based, so you can get started instantly. Even the latest codes and product details update automatically. All this pre-set information can save you hours researching the latest approvals, codes and anchors. Avoid other slow, error-prone tasks – like manual load transfer – thanks to the direct import function from other structural analysis software such as Etabs, Robot, SAP2000, StaadPro, Dlubal RFEM and RSTAB.
Minimise waste and save time, without compromising on code compliance
The extra precision offered by the paid version of PROFIS Engineering Suite, especially Component-based Finite Element Method (CBFEM) analysis, helps you cut excessive tolerances when designing connections. The result is a design which helps you to save material and labor costs, while still reflecting relevant codes and real behavior of the whole baseplate connection.
Free structural connection design software also available
After the free trial of the premium version ends, you can still rely on PROFIS Engineering Suite for virtually all common structural connections. Our standard free software is ideal for everyday cases where rigid design or a baseplate rigidity check is enough. You will be able to design cast-in place anchors using the free software.
Easily document your designs and export them to your main BIM and CAD software
Detailed, step-by-step anchor design reports displaying drawing and structural formulas on each step can be generated on-demand. Your designs can also be exported in 2D and 3D for integration into your standard BIM and CAD programs.
Structural design software in line with local or international standards
Various Eurocodes, ACI, AISC, Indian Standards, Australian Standards and Russian Codes are supported. PROFIS Engineering Suite automatically updates to use the latest versions of the codes and approvals you need.
Engineering software, but not just for Engineers
Designing with PROFIS Engineering Suite can improve efficiency on the jobsite too. Site Managers can use our smartphone app to find anchor item numbers, while Contractors can easily generate handrail reports to satisfy EN 1090 quality and safety standards.
Technical Data
Documents & Videos
Consulting & Support
PROFIS Engineering Suite
An all-in-one solution for connection and fastening design
PROFIS Engineering Suite is user-friendly, cloud-based software that makes designing and analyzing structural connections faster and easier than ever.
Not just for anchors, PROFIS designs, calculates and analyses multiple fixings, including steel to concrete, concrete to concrete, and steel to masonry as well as entire handrail and baseplate solutions that are more reliable, more cost-effective and code-compliant. The software also comes with application-specific engineering training that enables you to unlock the full potential of PROFIS.
WHAT CAN PROFIS ENGINEERING SUITE DO FOR YOUR COMPANY?
Enable compliance
Get peace of mind knowing that your design will automatically meet local codes and approvals. As a leading manufacturer of anchors, interpreting codes and putting them to work is our key ambition.
Improve accuracy
Manual input errors mean costly rework. Get it right the first time by importing load cases from structural analysis software, processing multiple loads simultaneously and building accurate BIM/CAD models.
Save time
Use templates to design connections in minutes. Don't waste time researching – let PROFIS spec the anchors instead. And speed up communication by granting your entire team access to the most recent file in the cloud.
Learn efficiently
Whether you are an experienced or a graduate engineer, our technical training – covering application basics and advanced modules – enable you to do fast, compliant designs.
Explore solutions for these applications
Anchoring to Concrete
Design complex and day-to-day structural baseplate connections
Use preset templates to design concrete fixings including post-installed and cast-in-place anchors, baseplates, welds and stiffeners quickly and accurately. With just a click you can analyze baseplates using CBFEM and perform rigidity checks to determine whether to adapt the design or the loads. Optimize fixture points and perform stress and strain checks – PROFIS considers applied loads such as seismic and fatigue and can find economical solutions for avoiding breakout using supplementary reinforcement. Smart baseplate design further simplifies your design process.
Generate a customized report complete with code references, calculations, product information and images.
Concrete to Concrete: PIR
Everything you need to design post-installed rebar applications
Add or extend concrete elements whether you're working with existing rebar or missing starter bars. Solve concrete structural joints and splices, and then verify the shear resistance at the interface between the old and new concrete.
Need to adapt the layout or geometry of your PIR design? PROFIS lets you easily customize the diameter, embedment depth and spacing parameters for existing concrete as well as post-installed.
Concrete to concrete: Overlay
Design for concrete overlay and post-installed shear dowels
With PROFIS you can dimension post-installed shear connectors and verify the interface between the concrete cast at different times. Establish whether your design has edges or is symmetric, and then define different areas of acting shear. You'll know your designs are sound thanks to intuitive 3D graphics that show how stresses vary throughout the connection.
Ready for installation? PROFIS has already saved you time by optimizing the layout.
Anchoring to masonry
Design masonry fixings more productively and accurately
PROFIS Engineering Suite can help you design accurate baseplate connections using masonry-approved anchors. Save time with intuitive built-in templates that combine your on-site data with factors such as allowable tension and shear loads while considering load reductions and geometry requirements.
Select from multiple sizes and types of brick or concrete masonry units, adjust their layout and define whether grout is present. You can even create your own templates to reduce design time on similar projects.
Choose the version that best suits your team
| PROFIS Engineering Suite |
Standard |
Premium Individual |
Premium Floating |
|---|---|---|---|
Cost Number of Users |
Free [GET] 1 |
SR999/year [BUY] 1 |
SR1,199/year [BUY] Unlimited |
Anchor Design ACI 318 and CSA A23.3 Design Post-Installed Anchors Cast-In Anchors |
✔ ✔ ✔ |
✔ ✔ ✔ |
✔ ✔ ✔ |
Structural Connection Applications Concrete Fixings Concrete to Concrete Concrete Over Metal Deck Masonry Fixings Handrail Fixings |
✔ ✔ ✔ ✔ |
✔ ✔ ✔ ✔ ✔ |
✔ ✔ ✔ ✔ ✔ |
| Productivity Features Project Sharing Customizable Reports Multiple Load Combinations Load Engine |
✔ ✔ ✔ ✔ |
|
|
Baseplate Design Type Profile, Baseplate, Weld, Stiffener and Concrete Design Rigid Anchor Load Distribution AISC Design Guide 1 Component Based Finite Element Analysis (CBFEM) Baseplate Rigidity Check |
✔
✔ |
✔ ✔ ✔ ✔ ✔ |
✔ ✔ ✔ ✔ ✔ |
Integrations With 3rd-Party Analysis Software Import Loads from Excel RISA Connection STAAD.PRO ROBOT ETABS SAP 2000 Dlubal |
|
✔ ✔ ✔ ✔ ✔ ✔ |
✔ ✔ ✔ ✔ ✔ ✔ |
Output Item Number BIM/CAD Export REVIT Plug-in TEKLA Plug-in |
✔
|
✔ ✔ ✔ ✔ |
✔ ✔ ✔ ✔ |
Engineering Trainings E-learning Face-to-face |
|
✔ |
✔ |
Use PROFIS to its full potential
Access on-demand PROFIS training materials, webinars and testimonials. Learn how to navigate modules, create and modify templates, optimize designs and much more.
Exchange ideas with PROFIS users
Have a question about anchor reinforcement? Curious about concrete breakout? Looking for cast-in-place anchor solutions? Search videos and exchange ideas with the Hilti community.
Learn more at Ask HiltiFind out about anchors
You've done the design – now learn more about the anchors. From cast-in anchors to injectable adhesive anchors to undercut anchors, you'll find all you need at our webshop.
Browse cast-in anchors Browse injectable adhesive anchors Browse undercut anchors