Skip to main content
Hilti

Features & Applications

Features
  • High performance and technical superiority as per international approvals
  • Suitable for diamond-cored holes – when prepared using the TE-YRT roughening tool
  • Injectable epoxy suitable for all-year use – cures at temperatures down to -5°C / 23°F
  • Longer working time – allows greater flexibility during installation
  • Suitable for water-filled holes and underwater applications
Applications
  • Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)
  • Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible
  • Anchoring structural steel connections (e.g. steel columns, beams, etc.)
  • Fastenings requiring seismic qualification
  • Fastening in natural stone and wood, including GLT and CLT made by spruce, pine or fir.

Technical Data

Documents & Videos

Consulting & Support

HIT-RE 500 V3

High performance epoxy adhesive anchor

Some of the greatest Hilti innovations have resulted from users like you who want to push the envelope of existing technology in their applications. Case in point: Hilti HIT-RE 500 V3 adhesive, with Hilti Safe Set™ Technology. It’s nothing short of revolutionary.

  • Keep productivity high under a wide range of temperatures—even in freezing conditions where no other epoxy adhesive anchoring system will work. Hilti HIT-RE 500 V3 is the only epoxy adhesive anchor that cures below freezing and is rated down to -5o C.
  • Balance longer work times with shorter cure times. Hilti HIT-RE 500 V3 gives you a 25-minute working time at 22o C with initial cure in four hours and full cure in six hours.
  • Use Hilti Adhesive Anchor products with diamond-coring methods. Combined with the Hilti Roughening Tool TE-YRT, HIT-RE 500 V3 is ICC Evaluation Service (ICC-ES) approved for use in diamond-cored holes in cracked concrete.
  • Get a 60 percent stronger bond. Hilti HIT-RE 500 V3 has the highest bond strength on the market—60 percent higher than Hilti HIT-RE 500-SD technology (the previous market leader).

Know more about HIT-RE 500 V3

Highlights Applications Advantages
  • Ultimate bond strength is 60% higher than the current market leader HIT-RE 500-SD
  • Fast and versatile concrete anchor that is less sensitive to extreme temperatures
  • Unique SafeSet system simplifies installation process and reduces the risk of human error
  • Pioneer in ICC approval for post-installed rebar connections
  • The only product with an ICC approval for diamond coring in cracked concrete
  • Structural post-installed rebar connections, ie. starter bars, beam to column connection, wall extension, etc.
  • Heavy-duty fastenings in cracked and uncracked concrete, ie. for structural beams, columns, silos, machinery, crash barriers, etc.
  • Fastenings in diamond cored holes
  • Post-installed anchoring in dry, wet, waterfilled or underwater conditions
  • Seismic retrofits
  • Higher performance in shorter embedment depths leads to cost savings while maintaining the same loads
  • Fastest curing time and lower sensitivity to temperature conditions allows for unmatched productivity
  • More reliable and safer installation due to simplified cleaning process
  • The truly versatile HIT-RE 500 V3 delivers proven performance in applications where others can’t.
  • Diamond-cored fastenings in cracked concrete.

    Due to the negative impact on the tension loads, diamond coring in cracked concrete has not been approved with any chemical anchor...until now.

    Hilti takes a revolutionary step forward with HIT-RE 500 V3 and the new TE-YRT roughening tool

    This solution is the only ICC-ES approved system in the industry and makes installation in core drilled holes easy, productive and reliable

    Shorter embedment depths.

    Please enter alternative text here (optional)

     

     

     

    Higher performance in shorter embedment depths leads to cost savings while maintaining the same loads. 

     

     

     

    SafeSet

    Please enter alternative text here (optional)

    Following the correct hole cleaning steps is the most critical part of a chemical anchoring application. The Hilti TE-CD and TE-YD Hollow Drill Bits together with the VC20/40 vacuum cleaners make subsequent hole cleaning unnecessary and generate a virtually dustless working environment. 

    Log in to proceed
    Contact us
    Contact
    Added to cart
    Added to cart
    Go to shopping cart

    Gives complete transparency and 24/7 convenience View all website benefits