All prices discounted net
Setting tool – required for installation of HDA undercut anchors
No technical data available
From
SR 272.85
Setting tool – required for installation of HDA undercut anchors
No technical data available
From
SR 471.75
Setting tool for capsule anchor rods with Conical heads
No technical data available
From
SR 433.50
Setting tool for capsule anchor rods with conical heads
No technical data available
From
SR 221.85
SI-S 1/2" L Deep impact socket
Ultimate
1/2" long impact socket for tightening bolts and anchors
- Connection end: 1/2" square
- Short/long: Long
- Length: 80 mm
From
SR 34.60
SI-S 1/2" S Short impact socket
Ultimate
1/2" (inch) short impact socket for tightening bolts and anchors
- Connection end: 1/2" square
- Short/long: Short
- Length: 40 mm
From
SR 22.05
SI-S 1/2" DW Deep impact socket
Ultimate
1/2" (inch) long impact socket for tightening bolts and anchors, with magnetic impact and thin wall adaptation
- Connection end: 1/2" square
- Short/long: Long
- Length: 100 mm
From
SR 112.42
Torque-controlled socket wrench for setting HSA anchors
- Connection end: 1/2 in
From
SR 503.70
HKD-TE-CX Setting tool (short)
Ultimate
Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit
- Connection end: TE-C (SDS-plus)
- Base material: Reinforced concrete, Concrete
- Working mode: Hammer drilling
From
SR 141.60
Setting tool for capsule anchor rods with hexagon heads
No technical data available
From
SR 429.25
Setting adapter for capsule anchor rods with hexagon heads
No technical data available
From
SR 147.90
Impact socket SI-SA 1/2" - 7/16" HEX
Ultimate
Impact socket accessories for fitting sockets to impact wrenches with different shank sizes, angles or lengths
- Connection end: 1/2" square, 7/16" hexagonal
- Short/long: Long
- Length: 50 mm
SR 63.51
Hilti Website