General Purpose Nails and Studs for Powder-Actuated Tools

X-P MX New

High-performance collated nail for use with powder-actuated tools on concrete and other base materials

• Base materials: Concrete (soft), Concrete (tough), Steel
• Minimum thickness of base material (concrete): 80 mm
• Corrosion protection: Galvanised zinc coated <20 µm

From SR 59.20

Compare (1)

X-P P8 New

High-performance single nail for use with powder-actuated tools on concrete and other materials

• Base materials: Concrete (soft), Concrete (tough), Steel
• Minimum thickness of base material (concrete): 80 mm
• Minimum thickness of base material (steel): 6 mm

From SR 59.60

Compare (1)

X-U MX

High-performance collated nail for concrete and steel, for powder-actuated tools

• Minimum thickness of base material (concrete): 80 mm
• Minimum thickness of base material (steel): 6 mm
• Corrosion protection: Galvanised zinc coated <20 µm

From SR 52.00

Compare (1)

X-U P8

High-performance single nail for concrete and steel, for powder-actuated tools

• Minimum thickness of base material (concrete): 80 mm
• Minimum thickness of base material (steel): 6 mm
• Corrosion protection: Galvanised zinc coated <20 µm

From SR 55.20

Compare (1)

X-U P8

High-performance single nail with steel washer for concrete and steel, for powder-actuated tools

• Minimum thickness of base material (concrete): 80 mm
• Corrosion protection: Galvanised zinc coated <20 µm
• Environmental conditions: Dry indoor

From SR 56.80

Compare (1)

X-C MX New

Collated nail for use with powder-actuated tools on concrete

• Base materials: Concrete (soft), Concrete (tough)
• Minimum thickness of base material (concrete): 80 mm
• Corrosion protection: Galvanised zinc coated <20 µm

From SR 261.60

Compare (1)

X-C MX

Standard collated nail for use with powder actuated tools on concrete

• Base materials: Concrete (soft), Concrete (tough)
• Minimum thickness of base material (concrete): 80 mm
• Corrosion protection: Galvanised zinc coated <20 µm

From SR 328.00

Compare (1)

X-C P8

Single nail for concrete, for powder-actuated tools

• Base materials: Concrete (soft), Concrete (tough)
• Minimum thickness of base material (concrete): 80 mm
• Corrosion protection: Galvanised zinc coated <20 µm

From SR 28.64

Compare (1)

X-C P8

Single nail for concrete, for powder-actuated tools

• Base materials: Concrete, Some types of masonry (sand-lime block), Concrete block
• Minimum thickness of base material (concrete): 80 mm
• Environmental conditions: Dry indoor

From SR 43.10

Compare (1)

X-C P8S New

Standard single nail with steel washer for use with powder actuated tools on concrete

• Base materials: Concrete (soft), Concrete (tough)
• Minimum thickness of base material (concrete): 80 mm
• Corrosion protection: Galvanised zinc coated <20 µm

From SR 652.00

Compare (1)

X-C P8S

Standard single nail with steel washer for use with powder actuated tools on concrete

• Base materials: Concrete (soft), Concrete (tough)
• Minimum thickness of base material (concrete): 80 mm
• Corrosion protection: Galvanised zinc coated <20 µm

SR 1,240.00

Compare (1)

X-CR P8

Stainless steel single nail for steel and concrete, for powder-actuated tools

• Minimum thickness of base material (steel): 5 mm
• Corrosion protection: Stainless steel A4(316) or equivalent
• Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution

From SR 332.80

Compare (1)

X-M8 P8

Carbon steel threaded stud for use with powder-actuated nailers on concrete (8 mm washer)

• Base materials: Concrete
• Corrosion protection: Galvanised zinc coated <20 µm
• Environmental conditions: Dry indoor

SR 540.00

Compare (1)

X-M10 P10

Carbon steel threaded stud for use with powder-actuated nailers on concrete (10 mm washer)

• Base materials: Concrete (soft), Concrete (tough)
• Corrosion protection: Galvanised zinc coated <20 µm
• Environmental conditions: Dry indoor

SR 624.00

Compare (1)

X-EM10H P10

M10 threaded stud (with 10 mm plastic washer)

• Base materials: Steel
• Minimum thickness of base material (steel): 6 mm
• Corrosion protection: Galvanised zinc coated <20 µm

SR 1,016.00

Compare (1)

X-EM6H FP8

M6 threaded stud (with 8 mm plastic washer)

• Base materials: Steel
• Minimum thickness of base material (steel): 4 mm
• Corrosion protection: Galvanised zinc coated <20 µm

SR 316.80

Compare (1)

X-EM8H P8

M8 threaded stud (with 8 mm plastic washer)

• Base materials: Steel
• Minimum thickness of base material (steel): 6 mm
• Corrosion protection: Galvanised zinc coated <20 µm

SR 628.00

Compare (1)

X-EM8H FP10

M8 threaded stud (with 10 mm plastic washer)

• Base materials: Steel
• Minimum thickness of base material (steel): 6 mm
• Corrosion protection: Galvanised zinc coated <20 µm

SR 536.00

Compare (1)

X-CR M8 P8

Stainless steel threaded stud for use with powder actuated nailers on concrete (8 mm washer)

• Base materials: Concrete (soft), Concrete (tough)
• Corrosion protection: Stainless steel A4(316) or equivalent
• Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Coastal areas, Outdoor, areas with heavy industrial pollution

SR 2,240.00

Compare (1)